HSHS RenewablesYours / A business that bought one
Sample data. Not connected to your Xero.
Yours

A business that bought one

Metal fabrication · Lancashire, England · About 20 staff, three workshops and an office.

Case study

The fabricator running twenty welders on paper travellers

Fifteen years established, laser and plasma and press-brake work, and one man who knows where every job is.

They bought it. Built and demonstrated to the owner and his shop-floor lead, then signed as a paying client in September 2026 and rolled out in stages. No before-and-after numbers yet: those need a baseline measured before go-live and their consent to publish.
Command centre showing live works orders, work centres and shop-floor status across three sites
The command centre: every live job and work centre on one board.

Where they were

An established bespoke fabricator: laser cutting, plasma up to 65mm plate, tube laser, press-brake bending, heavy steel and architectural metalwork. Mostly one-off complex jobs rather than repeat runs.

Jobs moved around the shop on paper travellers, with whiteboards for the schedule. That works until the owner is the only person who can answer "where is that job", and it stops working entirely across three separate workshops.

They were moving premises within months and wanted people trained on a system before the move, not during it.

What we found

Traceability was the real question, not scheduling

The owner's single biggest question was whether the serial number on a reel of welding wire could follow a job through to dispatch, tied to the machine that ran it and the welder who ran it. For EN 1090 work that is not a nice-to-have, it is the audit trail.

The shop floor cannot use phones

Mobiles are banned on the floor. Any system that assumed a phone in every pocket was dead on arrival. Foremen and managers get phones, the floor gets fixed kiosks.

Connectivity is not guaranteed

Lookups had to keep working when the connection dropped. We were specific about the line: viewing and lookup work offline, automations and alerts need a connection. Promising more than that would have been a lie we would meet again at go-live.

Drawings live with the operation, not in a folder

CNC program numbers and drawings needed to attach to the operation and open in the app, without downloading a file to a machine that should not have files on it.

The accounts package stays

They run Xero and are keeping it. The job was to integrate with it, never to replace it.

What we built

A command centre for three sites

Every live job, machine and hour on one board, with concurrent users on the same job and per-role access across three workshops and the office.

Clock-on kiosk

Touchscreen clock-on at the machine, so hours land against the job as the work happens instead of being reconstructed on Friday.

Consumable traceability

Wire serial tied to job, machine and operator, so the EN 1090 trail is a query rather than an archaeology project.

Job costing against the quote

Real hours and real material against what was quoted, per job, while the job is still open and something can be done about it.

Dispatch board with signature capture

Proof of delivery signed on the driver's device and attached to the job.

EN 1090 traceability screen with heat register, mill certificates and a genealogy explorer tracing jobs to steel casts
EN 1090 traceability. Every bar back to its mill cert, and a blocked sign-off where a cert is missing.
Shop-floor clock-on kiosk designed for a fixed touchscreen rather than a phone
The clock-on kiosk. Fixed screen at the machine, because phones are banned on the floor.

Scope

SitesThree workshops and an office, on one system, with concurrent users on the same job
Shop floorFixed touchscreen kiosks rather than phones, because mobiles are banned on the floor
OfflineViewing and lookup work without a connection. Automations and alerts need one, and we said so up front
AccountingIntegrates with their existing package. Replacing it was never in scope
MigrationBulk load of existing jobs and customers, not hand entry
Timing driverTrained before a premises move, not during it